The two-stage piston push centrifuge is a continuous operation filter centrifuge. It has automatic continuous operation, continuous slag discharge, high production capacity, low power consumption and uniformity, no peak load, fast drying, and small grain crushing. It has the advantages of stable operation and low vibration.
After the drum starts to reach full speed, the suspension to be separated is continuously sent to the cloth pan through the feed pipe, and under the action of the centrifugal force field, the suspension is distributed on the screen installed in the drum to make The solid phase is trapped on the screen to form an annular filter residue layer. Through the reciprocating movement of the primary drum, the filter residue is gradually pushed out of the drum and discharged through the casing discharge slot.
It is suitable for the suspension of crystalline or fibrous materials in the separation of particles. The average solid phase particle size is ≥0.1mm, and the solid phase content (volume ratio) is 30 to 70%. It can also be used for dewatering solid materials without fluidity by changing the feeding and distributing methods, with good washing effect and large output.
|Model||Capacity (L/H)||Inlet pressure||Outlet pressure||Motor power( Kw)||Weight (kg)||Dimension|
* Solid-liquid separation
* Liquid-liquid separation
* Liquid-liquid-solid separation
Widely used in: sewage salt treatment (MVR), edible salt, potassium chloride, ammonium chloride, ammonium sulfate (flue desulfurization), urotropine, bovine bone granules (gelatin), mirabilite, chlor-alkali chemical industry, sodium sulfite, nitrification Nearly a hundred kinds of materials such as cotton, cotton seed, and glyphosate.
Packing,Storage,Handling and Transportation
The guarantee period is 12 months from the date of putting the equipment into operation, but not more than 15 months from the date of delivery.
Free service within warranty:
During a warranty period of exploitation the Seller undertakes to execute warranty service of the equipment, troubleshooting and replacement of out of service spares, except for breakings, bound with incorrect exploitation of the equipment by the Buyer.
Set-up and adjusting of the equipment
After receiving the delivered Goods, the Buyer is obliged to prepare, obtained equipment and applicable lodgment for its installation. Then in written form to inform the Seller on readiness of the equipment for chief- equipment installation, start-up and adjusting.
If necessary,The Seller should send enough technical specialists to help execute the chief – equipment installation, start-up and adjusting equipment on the sight of the Buyer.
The Goods are to be shipped in export packing suitable for the type of goods to be delivered. Packing is to protect the Goods against any damage or corrosion when the Goods are transported by sea or by railway and to provide for possible transshipment of the goods on the way to the place of destination and for a long storage of the goods.